Home
ASI THRU® Thin-Film Semitransparent Solar Module ASITHRU-30-SG
Solar Module Titan-F10
Solar Module Titan F 20
Solar Module Titan TF-37/12
Solar Module Titan TF-32/12
Solar Module Titan-12-5 & Titan-12-10
Solar Module Titan-12-20 & Titan-12-37
Solar Module Titan-12-50
Solar Module Titan-12-75
Solar Module Titan-24-100
Products >> Solar Photovoltaic >> Solar Modules >> Titan-12-75

Titan-12-75

                                           Technology



Front View of TITAN-12-75
75 Watt Solar Multicrystalline Module

 
TITAN-12-75 photovoltaic module provides excellent value and performance for operation of both DC loads and in an inverter equipped system for AC loads. This module charges 12V batteries efficiently in virtually any climatic conditions. Typical commercial applications of this module, which generates a nominal maximum power of 75 watts, include telecommunications, remote villages, water pumping, small solar generators and home lighting kits. It is also ideally suited for grid-supplemental systems.

Module Design

36 full size crystalline solar cells connected in series form the heart of the module. Due to its construction of Glass/EVA/Tedlar, the module is light in weight in addition to protecting the module/cells against harsh environmental conditions. A torsion resistant module frame made of anodized aluminum guarantees high mechanical strength, making the module resistant to extreme wind and snow loads. Installation becomes more convenient through the terminal-cover, which provides safe handling.

                                           Quality



Back View of TITAN-12-75
75 Watt Solar Multicrystalline Module

 

TITAN has established very high quality standards. Constant checks and inspections guarantee uniformly high quality.  Each  module  which  leaves  the  production line  is  subjected  to  thorough  visual  inspections  as  well as mechanical and electrical tests.

Limited Warranties

Power output for 20 years.

Freedom from defects in materials and workmanship for 1 year.

Certifications

TITAN’s  multi-crystalline  modules  have  been  type approved  as  per  the  requirements  of  CEI/IEC  61215 standards  by  JRC,  Italy  and  also  conforms  to  the requirements of Electrical Protection Class II and EWG guideline 89/932 (CE). Besides  TITAN  has  a  quality management  system  that is  in  compliance  with  the  International  Quality  System Standard ISO 9002 and Q9002 (1994).

Technical Data

  Electrical Data (nominal)

The electrical data apply to standard test conditions (STC):

Irradiance at the module level of 1000 W/m2 with spectrum AM 1.5 and a cell temperature of 25°C.

Power (max.) 

Pmpp

75 Wp

Configuration

 

12 V

Voltage at maximum-power point 

Vmpp

17.2 V

Current at maximum-power point 

I mpp

4.30 A

Open-circuit voltage 

Voc

21.0 V

Short circuit current 

Isc

4.70 A

 

 

 

 

 

The rated power may only vary by ±5% and all other electrical parameters by a ±10%.

    Dimensions and weights

 

TITAN-12-75

Dimensions (tolerances + 2mm)

965 mm x 635 mm

Thickness

36 mm

Weight

7.00 kg.

 

 

 

All the above dimensions are subject to manufacturing tolerance of ± 2mm.

    Characteristic Data

Solar Cells per Foldable Module 

36 / 72

Type of Solar Cell 

EFG / Multi-crystalline

Connection

Terminal box with screw terminals

Cable Entry

Prepared for cable glands (M 12)

Connections (Optional)

4mm2-Suhner-cable with MC-Connectors

 

 

 

 

 

    Cell Temperature Coefficient

Power

Tk (Pn) 

- 0.47 %/°C

Open-circuit voltage 

Tk (Uoc) 

- 0.38 %/°C

Short-circuit current

Tk (Isc)

+0.10 %/°C

 

 

 


    Limits

Max. System Voltage

800 V D.C.

Operating Temperature 

-40 to +90°C

Storm Resistance 

Wind speed of 130Km/h and safety factor of 3

Humidity

95% at 40°C

 

 

 

       

 
Due to continuous product upgradation, EnergieSolar reserves the right to modify / change any specification without prior notice.