Solar Module Titan-12-50

Technology

The TITAN-12-50 crystalline solar modules are available in framed and laminate versions. Both versions feature a rugged laminate design. TITAN uses RWE Solar’s crystalline solar cells known for their high efficiency and quality to provide maximum energy production throughout the day. The module has a rated output of 50 Wp / 12 V. The efficient design of this module makes it an ideal all purpose solar module. The module is designed for easy interconnection to achieve voltage and current configurations for grid-connected systems as well as stand-alone systems.

                                           Module Design

36 crystalline solar cells form the heart of the module. These  full  square  cells  offer  a  homogeneous appearance,  optimal  use  of  the  area  and  are  known for high energy yields. Due to its construction of Glass/EVA/Tedlar, the module is light in weight in addition to protecting the module/cells against harsh environmental conditions. A  torsion  resistant  module  frame  made  of  anodized aluminum  guarantees  high  mechanical  strength, making  the  module  resistant  to  extreme  wind  and snow  loads.  The module is equipped with four additional mounting holes at side rails. Two bypass diodes integrated into the terminal-cover protect the cells when there is partial shading.  Also installation becomes more convenient through the terminal-cover which provides safe handling.

Quality

TITAN has established very high quality standards.  Constant checks and inspections at every step of production guarantee uniformly high quality. Each module which leaves the production line is subjected to thorough visual inspections as well as mechanical and electrical tests.

Certifications

TITAN-12-50 module has been type approved as per the requirements of CEI / IEC 61215 standards by JRC, Italy and also conforms to the requirements of Electrical Protection Class II and EWG guideline 89/932 (CE). Besides TITAN has a quality management system that is in compliance with the International Quality System Standard ISO 9002 and Q9002 (1994).

Options

Modified versions of the module are offered with pre-installed PV-cable and Multi-contact plugs.  Also if required, module frame can be provided with additional drain holes for easy outflow of excess rainwater.

Technical Data

Electrical Data (nominal)

The electrical data apply to standard test conditions (STC):

Irradiance at the module level of 1000 W/m² with spectrum AM 1.5 and a cell temperature of 25°C.

The rated power may only vary by ±5% and all other electrical parameters by a ±10%.

Dimensions and weights

All the above dimensions are subject to manufacturing tolerance of ± 2mm.

Characteristic Data

Cell Temperature Coefficient

Limits