Home
ASI THRU® Thin-Film Semitransparent Solar Module ASITHRU-30-SG
Solar Module Titan-F10
Solar Module Titan F 20
Solar Module Titan TF-37/12
Solar Module Titan TF-32/12
Solar Module Titan-12-5 & Titan-12-10
Solar Module Titan-12-20 & Titan-12-37
Solar Module Titan-12-50
Solar Module Titan-12-75
Solar Module Titan-24-100
Products >> Solar Photovoltaic >> Solar Modules >> Titan-12-20 & Titan-12-37

Titan-12-20 & Titan-12-37

                                                         Technology


Front and Rear View of TITAN-12-20 20 Watt Solar Multicrystalline Module

TITAN-12-20  and  TITAN-12-37  provide  cost-effective photovoltaic  power  for  DC  loads  with moderate  energy requirements. They charge batteries efficiently in virtually any climatic conditions.  Typical commercial applications of these modules, which generate nominal maximum power of 20 watts and 37 watts respectively, include remote telemetry, instrumentation systems, security sensors, signals and home lighting kits.

Module Design

36  crystalline  solar  cells  connected  in  series  form  the heart  of  the  module. These  modules  are  intended  for single module  applications  with  DC  system  voltage  not exceeding 30 volts. Due to its construction of Glass / EVA / Tedlar, the module is light in weight in addition to protecting the module/cells against harsh environmental conditions. A torsion resistant module frame made of anodized aluminum guarantees high mechanical strength, making the module resistant to extreme wind and snow loads. Installation becomes more convenient through the terminal-cover, which provides safe handling.


                                                          Quality


Front and Rear View of TITAN-12-37 37 Watt Solar Multicrystalline Module

TITAN has established very high quality standards. Constant checks and inspections guarantee uniformly high quality. Each  module which leaves the production line is subjected to thorough  visual inspections as well as mechanical and electrical tests.

Limited Warranties

Power output for 10 years.

Freedom from defects in materials and workmanship for 1 year.





Certifications

TITAN’s  multi-crystalline  modules  have  been  type approved  as  per  the  requirements  of  CEI/IEC  61215 standards  by  JRC,  Italy  and  also  conforms  to  the requirements of Electrical Protection Class II and EWG guideline 89/932 (CE). Besides  TITAN  has  a  quality management  system  that is  in  compliance  with  the  International  Quality  System Standard ISO 9002 and Q9002 (1994).

Technical Data

  Electrical Data (nominal)

The electrical data apply to standard test conditions (STC):

Irradiance at the module level of 1000 W/m2 with spectrum AM 1.5 and a cell temperature of 25°C.

Power (max.) 

Pmpp

20 Wp

37 Wp

Configuration

 

12 V

12 V

Voltage at maximum-power point 

Vmpp

16.74 V

17.2 V

Current at maximum-power point 

I mpp

1.31 A

2.10 A

Open-circuit voltage 

Voc

21.0 V

21.0 V

Short circuit current 

Isc

1.54 A

2.30 A

 

 

 

 

 

 

The rated power may only vary by ±5% and all other electrical parameters by a ±10%.

    Dimensions and weights

 

TITAN-12-20 

TITAN-12-37

Dimensions (tolerances + 2mm)

685 mm x 334 mm

965 mm x 429 mm

Thickness

34 mm

34 mm

Weight

2.73 kg.

5.10 kg.

 

 

 

All the above dimensions are subject to manufacturing tolerance of ± 2mm.

    Characteristic Data

Solar Cells per Foldable Module  36 / 72
Type of Solar Cell  EFG / Multi-crystalline
Connection Terminal box with screw terminals

 

 

 

    Cell Temperature Coefficient

Power Tk (Pn)  - 0.47 %/°C
Open-circuit voltage  Tk (Uoc)  - 0.38 %/°C
Short-circuit current Tk (Isc) +0.10 %/°C

 

 

 


    Limits

Max. System Voltage 800 V D.C.
Operating Temperature  -40 to +90°C
Storm Resistance  Wind speed of 130Km/h and safety factor of 3
Humidity 95% at 40°C

 

 

 

 



Due to continuous product upgradation, EnergieSolar reserves the right to modify / change any specification without prior notice.