Home
ASI THRU® Thin-Film Semitransparent Solar Module ASITHRU-30-SG
Solar Module Titan-F10
Solar Module Titan F 20
Solar Module Titan TF-37/12
Solar Module Titan TF-32/12
Solar Module Titan-12-5 & Titan-12-10
Solar Module Titan-12-20 & Titan-12-37
Solar Module Titan-12-50
Solar Module Titan-12-75
Solar Module Titan-24-100
Products >> Solar Photovoltaic >> Solar Modules >> Titan-12-5 & Titan-12-10

Titan-12-5 & Titan-12-10

                                           Technology



Front and Rear View of TITAN-12-5 5 Watt Solar Multicrystalline Module

The smallest of TITAN’s multi-crystalline module range, TITAN-12-5 and TITAN-12-10 photovoltaic modules operate DC loads with small to moderate energy requirements. They charge 12V batteries efficiently in virtually any climate. Typical commercial applications of these modules include remote telemetry, instrumentation systems, security sensors, portable lighting systems, and signals. Optionally the 5 Watt module can be supplied in 6V variant as well.


Module Design
36 crystalline solar cells connected in series form the heart of the module. These modules are intended for single module applications with DC system voltage not exceeding 30 volts. Due to its construction of Glass / EVA / Tedlar, the module is light in weight in addition to protecting the module/cells against harsh environmental conditions. A torsion resistant module frame made of anodized aluminum guarantees high mechanical strength, making the module resistant to extreme wind and snow loads. Installation becomes more convenient through the terminal-cover, which provides safe handling.

                                           Quality



Front and Rear View of TITAN-12-10
10 Watt Solar Multicrystalline Module

TITAN has established very high quality standards. Constant checks and inspections guarantee uniformly high quality.  Each module which leaves the production line is subjected to thorough visual inspections as well as mechanical and electrical tests.

Limited Warranties

  • Power output for 10 years.
  • Freedom from defects in materials and workmanship for 1 year.




    • Certifications

    TITAN’s  multi-crystalline  modules  have  been  type approved  as  per  the  requirements  of  CEI/IEC  61215 standards  by  JRC,  Italy  and  also  conforms  to  the requirements of Electrical Protection Class II and EWG guideline 89/932 (CE). Besides TITAN has a  quality management  system  that is  in  compliance  with  the  International  Quality  System Standard ISO 9002 and Q9002 (1994).

    Technical Data

      Electrical Data (nominal)

    The electrical data apply to standard test conditions (STC):

    Irradiance at the module level of 1000 W/m2 with spectrum AM 1.5 and a cell temperature of 25°C.

    Power (max.)  Pmpp 10 Wp 5 Wp 5 Wp
    Configuration   12 V 12 V 6 V
    Voltage at maximum-power point  Vmpp 17.2 V 17.2 V 8.60 V
    Current at maximum-power point  I mpp 0.58 A 0.29 A 0.58 A
    Open-circuit voltage  Voc 21.0 V 21.0 V 10.5 V
    Short circuit current  Isc 0.63 A 0.32 A 0.63 A

     

     

     

     

     

     

    The rated power may only vary by ±5% and all other electrical parameters by a ±10%.

        Dimensions and weights

     

    TITAN-12-10 

    TITAN-12-5 /  TITAN-6-5

    Dimensions (tolerances + 2mm)

    439 mm x 305 mm

    274 mm x 250 mm

    Thickness

    16mm

    16mm

    Weight

    1.36 kg.

    0.74 kg.

     

     

    All the above dimensions are subject to manufacturing tolerance of ± 2mm.

        Characteristic Data

    Solar Cells per Foldable Module   36 / 72
    Type of Solar Cell  EFG / Multi-crystalline
    Connection Terminal box with screw terminals

     

     

     

        Cell Temperature Coefficient

    Power Tk (Pn)  - 0.47 %/°C
    Open-circuit voltage  Tk (Uoc)  - 0.38 %/°C
    Short-circuit current Tk (Isc) +0.10 %/°C

     

     

     


        Limits

    Max. System Voltage 800 V D.C.
    Operating Temperature  -40 to +90°C
    Storm Resistance  Wind speed of 130Km/h and safety factor of 3
    Humidity 95% at 40°C

     

     

     

     

    Due to continuous product upgradation, EnergieSolar reserves the right to modify / change any specification without prior notice.