|
Solar Module Titan-F10
Introduction
TITAN Energy
System Ltd. is a leading manufacturer of Solar Photovoltaic Modules
in India. TITAN’s modules are certified by Ministry of Non-Conventional
Energy Sources (MNES), India, for domestic use and internationally
by Joint Research Commission (JRC), Italy. TITAN has designed and
developed a solar module called as Foldable Solar Charger. This
module is very light in weight and is highly suitable for charging
equipment in remote areas where conventional energy source is
not available, (like border patrol stations, high attitude areas,
remote villages) and can be easily carried in man-pack. TITAN-F10
has a rated power output of 10Wp.
Description
Foldable Solar
Charger is suitable for charging 6V, 12V, 18V and 24V,
Lead Acid and Nickel Cadmium batteries, used in man-pack wireless
equipment. Foldable Solar Charger is designed with more power in
a small portable package. The charger has four individual modules
conveniently housed in a rugged and waterproof canvas covering.
It can be spread open to sunlight whenever it is required to charge
the equipment and can be folded after use for easy handling and
carrying. Foldable Solar Charger conforms to relevant military standards
and is suitable for powering remote area telecom equipment,
charging laptops in the field or even for charging batteries
at difficult and inaccessible areas.
Quality
TITAN has established
very high quality standards. Constant checks and inspections at
every step of production guarantee uniformly high quality. Each
module that leaves the production line is subjected to thorough
visual inspections as well as mechanical and electrical tests guaranteeing
product life of minimum 10 years.
Certifications
TITAN modules
have been approved as per the requirements of MNES, India, CEI/IEC
61215 standards by JRC, Italy and also conforms to the requirements
of Electrical Protection Class II and EWG guideline 89/932 (CE).
Besides TITAN has a quality management system that is in compliance
with the International Quality System Standard ISO 9002
and Q9002 (1994).
Technical
Data
 |
Electrical
Data (nominal) |
The electrical
data apply to standard test conditions (STC):
Irradiance at
the module level of 1000 W/m2 with spectrum AM 1.5 and
a cell temperature of 25°C.
|
Power (max.) |
Pmpp |
10 Wp |
|
Voltage at maximum-power point |
Vmpp |
16.4 V |
|
Current at maximum-power point |
I mpp |
0.62 A |
|
Open-circuit voltage |
Voc |
21.0 V |
|
Short circuit current |
Isc |
0.73 A |
The rated power
may only vary by ±5% and all other electrical parameters by a ±10%.
 |
Dimensions
and weights |
| |
Open
(Fully spread) |
Folded |
| Dimensions
(tolerances + 2mm) |
285
mm x 750 mm |
295
mm x 140 mm |
| Overall
height (tolerances + 2mm) |
9mm |
45mm |
| Weight |
1.75
kg. |
 |
Characteristic
Data |
|
Solar Cells per Foldable Module |
72 |
|
Type of Solar Cell |
EFG / Multi-crystalline (50 x 25 mm2) |
|
Connection |
Cable with connector(s) |
 |
Cell
Temperature Coefficient |
|
Power |
Tk (Pn) |
- 0.47 %/°C |
|
Open-circuit voltage |
Tk (Uoc) |
- 0.38 %/°C |
|
Short-circuit current |
Tk (Isc) |
+0.10 %/°C |
 |
Limits |
|
Max. System Voltage |
600 V D.C. |
|
Operating Temperature |
-30 to +65°C |
|
Storage Temperature |
-40 to +70°C |
|
Humidity |
95% at 40°C |
|