Home
ASI THRU® Thin-Film Semitransparent Solar Module ASITHRU-30-SG
Solar Module Titan-F10
Solar Module Titan F 20
Solar Module Titan TF-37/12
Solar Module Titan TF-32/12
Solar Module Titan-12-5 & Titan-12-10
Solar Module Titan-12-20 & Titan-12-37
Solar Module Titan-12-50
Solar Module Titan-12-75
Solar Module Titan-24-100
Products >> Solar Photovoltaic >> Solar Modules >> Solar Module Titan-24-100

Solar Module Titan-24-100

                                          Technology



Front and Rear View of TITAN-24-100 100 Watt Solar Multicrystalline Module  
The TITAN-24-100 crystalline solar modules are available in framed and laminate versions. Both modules feature a rugged laminate design. TITAN uses RWE Solar’s crystalline solar cells known for their high efficiency and quality to provide maximum energy production throughout the day. The module has a rated output of 100 Wp and is available in both 12 volt and 24 volt version. The efficient design of these modules, with its large surface area, is ideally suited for medium and high power applications. The module is designed for easy interconnection to achieve voltage and current configurations for grid-connected systems as well as stand-alone systems.

Module Design

72 crystalline solar cells form the crux of the module. These full square cells offer a homogeneous appearance, optimal use of the area and are known for high energy yields. Due to its construction of Glass/EVA/Tedlar, the module is light in weight in addition to protecting the module/cells against harsh environmental conditions. A torsion resistant module frame made of anodized aluminum guarantees high mechanical strength, making the module resistant to extreme wind and snow loads. Three  bypass  diodes  integrated  into  the  terminal-cover protect  the  cells  when there  is  partial  shading.  Also installation becomes more convenient through the terminal-cover which provides safe handling.

Quality

TITAN has established very high quality standards. Constant checks and inspections guarantee uniformly high quality.  Each  module  which  leaves  the  production  line  is subjected  to 
 thorough  visual  inspections  as  well  as mechanical and electrical tests.

Certifications

TITAN-24-100 module has been type approved as per the requirements of CEI/IEC 61215 standards by JRC, Italy and also conforms to the requirements of Electrical Protection Class II and EWG guideline 89/932 (CE). Besides TITAN has a quality management system that is in compliance with the International Quality System Standard ISO 9002 and Q9002 (1994).

Options

Modified  versions  of  the  module  are  offered  with  pre-installed  PV-cable  and  Multi-contact  plugs.  Also a 12 volt variant of the same module is available.

Technical Data

  Electrical Data (nominal)

The electrical data apply to standard test conditions (STC):

Irradiance at the module level of 1000 W/m2 with spectrum AM 1.5 and a cell temperature of 25°C.

Power (max.)  Pmpp

100 Wp

 100 Wp
Configuration

 

24 V

 12 V
Voltage at maximum-power point  Vmpp

34.5 V

 17.2 V
Current at maximum-power point  I mpp 2.9 A 5.8 A
Open-circuit voltage  Voc 42.5 V

21.3 V
Short circuit current  Isc 3.2 A

6.4 A

 

 

 

 

 



The rated power may only vary by ±5% and all other electrical parameters by a ±10%.

    Dimensions and weights

All the above dimensions are subject to manufacturing tolerance of ± 2mm.

  Module Laminate
Dimensions (tolerances + 2mm) 650 mm x 1295 mm 644 mm x 1289 mm
Thickness 36 mm 4.8 mm
Weight 9.50 kg. 8.10 kg.

 

 

 



    Characteristic Data

Solar Cells per Foldable Module  72
Type of Solar Cell  EFG / Multi-crystalline
Connection Terminal box with screw terminals
Cable Entry Prepared for cable glands (M 12)
Connections (Optional) 4mm2-Suhner-cable with MC-Connectors

 

 

 

 

 

    Cell Temperature Coefficient

Power Tk (Pn)  - 0.47 %/°C
Open-circuit voltage Tk (Uoc)  - 0.38 %/°C
Short-circuit current Tk (Isc) +0.10 %/°C

 

 

 


    Limits

Max. System Voltage 800 V D.C.
Operating Temperature  -40 to +90°C
Storm Resistance  Wind speed of 130Km/h and safety factor of 3
Humidity 95% at 40°C

 

 

 

 

 
Due to continuous product upgradation, EnergieSolar reserves the right to modify / change any specification without prior notice.