|
ASI
THRU® Thin-Film Semitransparent Solar Module ASITHRU-30-SG
Design
 |
Semitransparent
ASITHRU-30-SG,36 VDC |
Type ASITHRU-30-SG
solar modules are a product of the thin-film technology based on
amorphous silicon; they consist of ASI® tandem cells deposited
on glass. A noteworthy feature of these ASI THRU® solar modules
is the low temperature dependence that ensures almost constant power
independently of the ambient temperature. Not containing any heavy
metals, like cadmium, the ASI THRU® modules are particularly
environment-friendly. They are frameless, and consist of a front
glass with the ASI® tandem cells deposited thereon, laminated
with PVB foil to a tempered rear glass pane.
Applications
 |
 |
| Lateral
mounting clearance from the connection button. |
Multi-Contact
plug connectors |
The frameless
ASITHRU-30-SG modules are particularly well suited for installation
in standard facade or roof mounting systems. The statics of the
glass module is designed to satisfy almost all regulations of DIN
1055. To meet the guidelines for overhead glazing PVB is used as
laminating foil. A general permit for these modules to qualify as
overhead glazing elements has been applied for at the "Deutsches
Institut für Bautechnik” (German Institute for Building
Technology). The modules are already fitted with cable connectors
to facilitate quick and safe series connections. Due to specific
properties of the ASI THRU®- modules, no bypass diodes are required.
Semitransparent ASITHRU-30-SG, 36 V
| |
Current
/voltage characteristics at different solar irradiation levels
and module temperatures. |
| 
New
Solar Architecture
Brilliant, colour-neutral "see-through" |
Designation:
SG = laminated safety glass |
Technical
Data
 |
Electrical
Data (nominal) |
The electrical
data apply to standard test conditions (STC – 1000 W/m2, spectral
distribution of AM 1.5, cell temperature 25°C) after reaching
a stabilized state upon sun exposure for a few months. Initially
the power output may exceed the nominal power by about 18%. The
data are subject to a tolerance of ± 10%.
|
Power (max.) |
Pmpp |
27 Wp |
|
Voltage at maximum-power point |
Vmpp |
36 V |
|
Current at maximum-power point |
I mpp |
0.75 A |
|
Open-circuit voltage |
Voc |
49 V |
|
Short circuit current |
Isc |
1.02 A |
 |
Dimensions
and weights |
|
Dimensions |
1000 mm x 600 mm |
|
Module glass thickness / module thickness with connection button |
10 mm / 22 mm |
|
Four-sided non-photoactive margin for clamp mounting |
16 mm |
|
Weight |
14 kg. |
 |
Characteristic
Data |
|
Solar Cells type |
Thin-film amorphous silicon in ASI® tandem cells |
|
Appearance |
Uniformly dark-brown |
|
Semi transparency |
about 10 % transmission, colour-neutral |
|
Electrical connection |
Double insulated cable (Huber & Suhner), 2.5 mm2
cross-section, 100 cm length per polarity, MC®-plug connectors |
 |
Cell
Temperature Coefficient |
|
Power |
Tk (Pn) |
- 0.2 %/°K |
|
Open-circuit voltage |
Tk (Uoc) |
- 0.33 %/°K |
|
Short-circuit current |
Tk (Isc) |
+0.08 %/°K |
 |
Limits |
|
Max. System Voltage |
1000 V D.C. |
|
Operating Temperature |
-40 to +85°C |
|
Maximum Surface Load |
•
two-sided clamping along length: 3200 N/m2• four-sided
clamping: 4600 N/m2 |
 |
Qualifications |
| Type
ASITHRU-30-SG solar modules meet the requirements of CEC 701
(equivalent to IEC 61215), safety class II, and of the EU guidelines,
e.g. EMV according to DIN EN. |
|
